Z94-2．8型制釘機
Z94-2．8型制釘機是滾動軸承結構，其曲軸、左右側軸加粗，鐓制速度高達每分鐘450枚，是生產較小規格水泥鋼釘及其它異型鋼釘?shù)睦硐朐O(shè)備.
Z94-2.8nail machine is constructured by rollngbaring.The crank shaft is widen around. It can produce 450 nail inaminute. That's also theoptimal equipment to make small concrete nail and other slender steel nail.
主要技術規格：MAUB TECHENICAL SPECITICAION
|
綫材最大直徑Max.diameter of wire |
2.8mm |
|
綫材最小直徑Min.diameter of wire |
1.2mm |
|
釘桿最大長度Max.length of nail |
50mm |
|
釘桿最小長度Min.length of nail |
15mm |
|
理論產量The oretical output(pacs／min) |
450枚／分 |
|
電機功率Motor power |
3kw |
|
機器重量Weight |
850kg |
|
外型尺寸Overall dimensions(L×W × H ) |
1780×846×1000(mm) |
注：聯系我時，請說是在“傲立機床網”上看到的，謝謝！
